How to Build a Dakota Fire Hole

Considering that the Dakota fire hole is an obscure fire building tradition, I sure get asked about it quite often. People want to know if it really works, is it worth the trouble, and a whole host of other questions.

The Dakota fire hole is a Native American fireplace style that burns wood efficiently like a wood stove. It also provides a greater margin of fire safety by keeping coals and flames fairly contained when you must have an open fire in windy conditions.

By spending some extra effort on the front end to dig the fire hole, you can burn a hot fire with less wood. This can be a huge time and material saver in areas where wood is limited.

Here’s how to make it.

Start off by selecting a place where you can dig into soft soil with few roots or rocks. Good drainage is important, too. You won’t keep a fire going long if the hole fills with ground water. Begin by digging a hole that is one foot deep with a wider bottom than the opening. The bottom of the hole should be a little more than one foot across, and the hole opening at ground level should be a little less than a foot wide.

Now, dig a second hole upwind, going down about one foot deep and connecting to the first hole that you dug. This second hole acts as a wind tunnel, feeding fresh air into the bottom of the other hole, which will be used as the fire pit. The second hole can go straight down, and connect to the first hole in a U-shaped fashion. Or, the second hole can simply be a shaft dug at an angle to connect to the bottom of the fire pit hole.

If you have tried this technique out, or plan to, please share your ideas in the comments section below!

Similar posts
  • Char ClothChar cloth (or charred cloth) is a swatch of fabric made from vegetable linen, such as cotton, that has been converted (i.e. decomposed using a process call pyrolysis) into a slow-burning fuel of very low ignition temperature.  A single, small spark placed on char cloth will ignite the cloth which will begin to glow red.  [...]
  • Tinder For Fire MakingAs any good survivalist knows, when caught in a survival situation, one of the first tasks at hand will be to build a fire. In addition to knowing how to construct a fire in the wilderness, you’re going to have to have the appropriate resources available which includes not only fuel, but the oh-so-important tinder [...]
  • A Swedish Torch Fire  The Swedish Fire Torch, also known as a Canadian Candle, is a simple and efficient method to make a fire using a single log. In addition to being easy to ignite and control, it is small and compact, burns long (is a self-feeding fire method) and provides not only excellent warmth but a stable [...]
  • DIY Fire PistonThis is how I make my own fire pistons out of normal commercially available hardware store material. There are, off course, numerous other ways to make working fire pistons. Materials needed: • Copper tubing Ø 12 mm (inside ± 10 mm) • Brass end cap for 12 mm tubing • Wooden piston rod (± 10 [...]
  • Friction Fire with a Bow and DrillThe bow and drill method is, by far, the most likely friction method for making a fire in the field. This method has been around for thousands of years, and the components can be made from a wide range of materials. A friction fire happens when one wooden surface is rubbed, ground or spun against [...]

No Comments Yet

Join the discussion...